Progress Tracker

TODO

  • DCMT
  • IAQM
  • RLHT
  • SOLR
  • HEAT
  • LVAI
  • RLAY
  • SERV
  • THRM
  • USBP

Release Testing Tracker

  • βœ… Done
  • πŸ› οΈ In Progress
  • ❌ Incomplete
  • ❓ Unknown
  • πŸ” Revising

    This is to track the procurement and testing of all the BREADS boards for release.

Name Schem PCB BOM Docs Review FW Test Notes Known Issues
Controller β€” β€” β€” β€” β€” β€” β€” β€” β€”
Nano_Original_Kicad βœ… βœ… βœ… πŸ› οΈ ❌ - ❌ Nano v3.3 but w/out reg., button, D13 LED; uses USB mini-b β€”
can-nano-shield βœ… βœ… πŸ” ❌ βœ… ❌ ❌ Arduino Nano shield with MCP2515 & TJA1051/3 β€”
Design β€” β€” β€” β€” β€” β€” β€” β€” β€”
Slice_TEMP βœ… βœ… πŸ” ❌ βœ… - - 2 and 4 layer variants and 4 layer XL β€”
Slice_PRTO βœ… βœ… πŸ” ❌ βœ… - ❌ 2 layer: screw term conns, SMT-proto, and TH-proto β€”
2 layer β€” β€” β€” β€” β€” β€” β€” β€” β€”
Slice_AQDO βœ… βœ… πŸ” ❌ ❌ ❌ ❌ Analog frontend for galvanic (Clark‑type) oxygen electrode probes Β 
Slice_AQEC βœ… βœ… πŸ” ❌ ❌ ❌ ❌ Analog frontend for platinum redox ORP electrode probes Β 
Slice_AQOR βœ… βœ… πŸ” ❌ ❌ ❌ ❌ Analog frontend for two‑electrode conductometric (cell) sensor probes Β 
Slice_AQPH βœ… βœ… πŸ” ❌ ❌ ❌ ❌ Analog frontend for glass membrane pH electrode probes Β 
Slice_BUCK βœ… βœ… πŸ” ❌ ❌ ❌ ❌ Simple discrete component buck converter Needs advanced control programming
Slice_DCMT βœ… πŸ› οΈ πŸ” ❌ ❌ πŸ” πŸ” Fixed pin and layout, added back fuses Motor1 drive pin isnt PWM
Slice_HEAT βœ… πŸ› οΈ πŸ” ❌ ❌ ❌ ❌ layout optimized, duplicated circuit. op-amp issues
Slice_IAQM πŸ› οΈ πŸ› οΈ πŸ” ❌ ❌ πŸ› οΈ πŸ› οΈ PCB of env-safety-monitor from PV Box paper. SD card footprint flipped
Slice_LEPD βœ… βœ… πŸ” ❌ ❌ ❌ ❌ For BR flow cell. Referencing Pioreactor, for OD. β€”
Slice_LOAD βœ… βœ… πŸ” ❌ ❌ ❌ ❌ Load cell ADC. β€”
Slice_LVAI βœ… πŸ› οΈ πŸ” ❌ ❌ ❌ ❌ Analysis of cascaded amp. Needs expanded signal analysis capabilities
Slice_RLAY βœ… πŸ› οΈ πŸ” ❌ ❌ ❌ ❌ Updated to latest BREADS TEMPlate, replaced terminals with standard. β€”
Slice_RLHT πŸ› οΈ πŸ› οΈ πŸ” ❌ ❌ πŸ” πŸ” Changed terminals to standard ones, upgraded to MAX31855 β€”
Slice_RTDM βœ… βœ… πŸ” ❌ ❌ ❌ ❌ MAX31865 x4 for measuring 2-,3-, or 4-wire RTDs β€”
Slice_SERV βœ… πŸ› οΈ πŸ” ❌ ❌ ❌ ❌ Redid voltage in sel. Past one behaved erratically, fried servos
Slice_STEP πŸ› οΈ πŸ› οΈ πŸ” ❌ ❌ ❌ ❌ NEEDS UPDATING. β€”
Slice_THRM βœ… πŸ› οΈ πŸ” ❌ ❌ ❌ ❌ 3 vars: MAX6675 (A), MAX31855 (B), MAX31856 (C). β€”
Slice_USBP βœ… πŸ› οΈ πŸ” ❌ ❌ ❌ ❌ Redid layout to be optimized, updated to latest BREADS TEMPlate. β€”
Slice_VCAC βœ… βœ… πŸ” ❌ ❌ ❌ ❌ curr. read (10,20,40A; same fp) + AC or DC volt. read, replaces CRXX β€”
Slice_VCDC βœ… βœ… πŸ” ❌ ❌ ❌ ❌ curr. read (10,20,40A; same fp) + AC or DC volt. read, replaces CRXX β€”
4 layer β€” β€” β€” β€” β€” β€” β€” β€” β€”
Slice_AOEM βœ… βœ… πŸ” ❌ ❌ ❌ ❌ Atlas Sci. pH/DO/ORP/EC OEM IC with onboard isolation β€”
Slice_GDHB βœ… βœ… πŸ” ❌ ❌ ❌ ❌ for large BDC motors β€”
Slice_FPSG βœ… βœ… πŸ” ❌ ❌ ❌ ❌ New for high speed strain gauge (load cell) measurements. β€”
Slice_SOLR πŸ› οΈ πŸ› οΈ πŸ” ❌ ❌ ❌ ❌ Targets 3 liion cells to generate 12V pwrsrc off-grid. β€”
Slice_THMX βœ… βœ… πŸ” ❌ ❌ ❌ ❌ using LTC2983 multi-channel, multi-temp sensor IC β€”

Order Sequence

  • First (May 2025)

    • All slices (current template)
    • ProtoKit
    • Koami board
  • Second (Fall 2025)

    • RPi Hub Hat
    • CAN backplane
    • All slices to newest template with revisions
    • BreakoutPack
    • CircuitBlocks
    • DevBoardDepot